Enviro Shield

Description

Enviro Shield is a two part, water based epoxy that acts as a hydrostatic barrier and primer coating. Enviro Shield can be used in applications requiring a hydrostatic barrier against water ingress from the negative side. In addition, Enviro Shield can also be used as a moisture tolerant primer under a range of Envirosystems membranes and UV stable top coats. It is suitable for commercial, industrial and residential applications.

Typical Uses

Enviro Shield can be used to provide a hydrostatic barrier coating in the following situations:

Negative side pressure up to 25m head

• Treatment and mitigation of rising damp
• Below grade basements & car parks
• Barrier coat for water tank membranes
• Tunnels & Lift wells
• Retaining walls

Negative side pressure up to 3m head

Enviro Shield can be used to provide either a negative or positive hydrostatic barrier coating under low pressure (up to 3m head) in the following situations:

• Efflorescence control
• Treatment and mitigation of rising damp

Positive side pressure

• Barrier coat under subsequent membranes
• Window reveals

Primer

Enviro Shield can be used as a moisture tolerant primer in the following situations:

• Self-priming barrier coat
• Internal and External Wet Areas
• Retaining Walls
• Enviro Shield can also be used to promote adhesion when a premium priming solution is required

Suitable Substrates

Enviro Shield is suitable for use over:

• New concrete
• Concrete blockwork
• Compressed and lightweight CFC sheeting
• Most masonry or stone surfaces.

Features

• Bonds to damp and green concrete < 25% MC
• Resistant to a wide range of chemicals
• Negative side barrier
• Rising damp control
• High solids content
• Low VOC content
• Easy to apply
• Water based