Enviro HP1200

Description

Enviro HP1200 is a two component, spray applied, solvent free, flexible, 100% solids hybrid polyurethane waterproofing membrane suitable for commercial, industrial and infrastructure applications. Enviro HP1200 is uniquely formulated to provide high elasticity, tensile and tear strength while also possessing excellent abrasion resistance.

Typical Uses

Enviro HP1200 can be used for to provide a 100% trafficable waterproof membrane for the following areas;

• Roof Tops
• Car Parks
• Stadiums
• Podiums
• Planter Boxes
• Retaining Walls
• Cut & Covered Tunnels
• Potable Water Storage (HP1200PW)
• Swimming Pools (HP1200AC)
• Wet areas

Suitable Substrates

Enviro HP1200 is suitable for use over the following substrates;

• New concrete - cured for min. 28 days under 4.5% moisture (gravimetric method)
• Renders and screeds - cured for min. 7 days under 4.5% moisture (gravimetric method)
• Fibre cement sheets - walls (min. 6mm)
• Compressed fibre cement (min. 15mm)
• Plasterboard walls - wet area grade only (min. 10mm)
• Plywood (PAA) - wet area grade only
• Steel

Features

• Fast Curing
• Solvent Free
• Seamless Application
• Trafficable
• Elastomeric
• Low VOC
• Excellent Abrasion Resistance
• Excellent Durability

Purchasing Information

IMPORTANT INFORMATION
This product is not available for purchase online.

If you wish to purchase this product, please contact our Sydney Trade Centre. This is a specialised product and application of this product should only be in accordance with training provided by Envirosystems Technologies and by experienced accredited applicators. Accredited applicators must ensure the suitability of the material for intended use prior to installation and any such determination is solely the responsibility of the purchaser.