Adhesives
Coatings
Flooring
Sealants
Accessories
Waterproofing
Enviro Prime P2 was specified as the fast-cure polyurethane primer solution for One Central Park, a multi-stage $2 billion urban village and iconic green development in Sydney’s CBD fringe. Selected for its strong adhesion and rapid cure over challenging substrates including steel, asphalt, bitumen-based materials and concrete, Enviro Prime P2 helped provide a reliable priming layer to support subsequent waterproofing works across a range of areas within the project. Its performance aligned with the build’s high-quality requirements, helping deliver consistent substrate preparation on this landmark destination.
Remedial
Enviro Epoxy Grout 100
Enviro Epoxy Grout 100 is a three component, high strength, fluid epoxy grout system offering premium performance for structural applications. Enviro Epoxy Grout 100 is specially designed for pile and pile top encapsulation and for grouting in tight clearances where maximum flow is required. Enviro Epoxy Grout 100 when applied will accept the application of most Envirosystems spray and hand applied waterproofing membranes.
- High-strength, watertight epoxy grout
- Bonds to damp surfaces
- Excellent flow + chemical resistance
Technical Documents
Case Studies
Features & Uses
Features
- High Strength
- Long Term Service Life
- Bonds to Damp Surfaces
- High Chemical Resistance
- High Mechanical Strength
- Excellent Flow
Uses
Enviro Epoxy Grout 100 is a high-performance fluid epoxy grout system designed for applications where high strength and water tightness are required. Some applications where Enviro Epoxy Grout 100 can be used are as follows:
- Pile & Pile Top Encapsulation
- Crane Rails
- Wharf Pile Repairs
- Baseplate and Machinery Grouting
- Exterior Grouting
- Machinery with High Dynamic Loads and Vibration
Primers and Related Products
Enviro Epoxy B-LV
- Exceptional Versatility
- Long-Lasting Protection in Demanding Environments
- Superior Adhesion Across Challenging Surfaces
Enviro BSM
- Blind side fully bonded membrane
- Chemical & gas resistant
- Fully adhered lap joints
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Remedial
Enviro Gel 165
Enviro Gel 165 is a low viscosity hydrophilic polyurethane formula with high elongation properties for sealing leaking cracks or joints where movement is possible and structures with continuous moisture exposure. Enviro Gel 165 is typically used as a single component system (base resin) however Enviro Injection Gel Accelerator can be incorporated into the system for quicker reaction times. The accelerator can be used by experienced applicators to control the reaction time as warranted by the site conditions. Being a hydrophilic formulation, when reacted with water, the resulting foam will create a flexible seal with the injected repair.
- Pumpable 1-part gel (≤50mm joints)
- Expands up to 25× for a permanent seal
- 100% solids, no VOCs (solvent-free, non-toxic)
Technical Documents
Case Studies
Features & Uses
Features
-
100% Solids
-
No VOCs
-
Non-Flammable
-
Excellent Adhesion
-
Expands to 25 times initial volume
-
Pumps as Single Component
-
Controllable Reaction Times
-
Non-Toxic Permanent Seal
-
No TDI’s
-
Solvent Free
Typical Uses
Enviro Gel 165 can be used for sealing joints such as construction joints less than 50 mm in concrete slabs, concrete panels, fibre cement sheets, block and brickwork, around window and door frames. Enviro Gel 165 can also be used for:
-
Water Related Facilities
-
Waste Treatment Plants
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Remedial
Enviro Gel 155
Enviro Gel 155 is a moderate viscosity hydrophobic polyurethane formula with high elongation properties for sealing leaking cracks or joints where movement is possible. The Enviro Gel 155 system is comprised of a base resin (Part A) and an accelerator (Part B). The accelerator can be used be experienced applicators to control the reaction time as warranted by the site conditions. Being a hydrophobic formulation, when reacted with minimal amounts of water, the resulting foam will maintain its physical form and not be subject to shrinkage due to wet/dry cycles. When injected into wet cracks, Enviro Gel 155 produces closed cell foam.
- Pumpable 1-part gel (≤50mm)
- 100% solids, no VOCs
- Expands to 25 times initial volume
Technical Documents
Case Studies
Features & Uses
Features
- 100% Solids
- No VOC’s
- Non-Flammable
- Excellent Adhesion
- Expands to 25 times initial volume
- Pumps as Single Component
- Controllable Reaction Times
- Non-Toxic Permanent Seal
Typical Uses
Enviro Gel 155 can be used for sealing joints such as construction joints less than 50mm in concrete slabs, concrete panels, fibre cement sheets, block and brickwork, around window and door frames. Enviro Gel 155 can also be used for;
- Water Related Facilities
- Waste Treatment Plants
- Storm Water Systems
- Parking Garages
- Manhole Facilities
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Remedial
Enviro Mortar 45
Enviro Mortar 45 is a high performance, polymer modified, shrinkage compensated, structural repair reinstatement mortar with high ultimate compressive strength and abrasion resistance. Enviro Mortar 45 can be used for all vertical, horizontal and overhead applications.
- 1-part patch & repair mortar (vertical to 80mm)
- Shrinkage compensated + high bond
- Low permeability + chemical/abrasion resistant
Technical Documents
Case Studies
Features & Uses
Features
- Shrinkage compensated
- Excellent bond strength
- High abrasion resistance
- High chemical resistance
- One component
- High ultimate strength
- Excellent workability
- Low permeability
- High compressive strength
Typical Uses
- Repairing damaged concrete
- Terraces, balconies and facades
- Concrete cancer repairs
- Dams, bridges and concrete tanks
- Repairs requiring chemical resistance
- Structural repairs
- Reprofiling of worn concrete slabs
- Vertical repairs up to 80mm
- Sewer tunnels and pipes
- Critical waterproof areas
Related Products
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Primers
Enviro Prime SB
Enviro Prime SB is a universal solvent-based primer. It provides excellent adhesion for most of Envirosystems range of products.
- 1-part primer (simple to use)
- Universal for many substrates (render, concrete, brick, timber, FC)
- Fast drying
Technical Documents
Case Studies
Features & Uses
Features
- Simple to use – 1 part
- Versatile / universal
- Suitable for a wide range of substrates
- Fast drying
Typical Uses
Enviro Prime SB is suitable for use with the following range of Envirosystems products:
- Enviro Clad
- Enviro 700X
- Enviro 200P Ultra
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Primers
Enviro Prime P2
Enviro Prime P2 is a 2 part fast cure polyurethane primer for use over steel, asphalt, bitumen based materials and concrete.
- Very low VOC + flexible
- Bonds to steel + asphalt/bitumen + concrete
- Solvent-free 2-part PU primer
Technical Documents
Case Studies
Features & Uses
Features
- Very low VOC
- Bonds to most metal surfaces
- Excellent bond to a wide variety of substrates
- Highly flexible
- Solvent free
Typical Uses
Enviro Prime P2 is a solvent free, two component polyurethane primer, which provides both a strong chemical and physical bond to subsequent waterproofing materials and most metal surfaces.
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us