Adhesives
Coatings
Flooring
Remedial
Accessories
WaterproofingEnviro Flex FC
Enviro Flex FC is a fast curing, high performance, multi-purpose, neutral cure, elastomeric polyurethane joint sealant and adhesive, which when cured, forms a waterproof seal.
- UV-stable, permanently flexible (≤50mm)
- Fast skin/cure + strong adhesion (non-sag, no shrink)
- Low VOC, paintable + high pick resistance
Features
- Excellent adhesion
- Rapid skinning and fast cure
- UV stable
- Long-term durability
- Excellent bi-axial flexibility
- Excellent organic chemical resistance
- Very low VOC content
- Low dirt pick up
- Non-staining
- Paintable after cure
- Permanently flexible
- Stable – No shrinkage
- Bonds and Seals at the same time
- Short cut-off string
- Adhesion to a wide range of substrates
- Replaces rivets and mechanical fasteners
- Non-sag consistency
- Good thixotropy
- Allows equalised stress transfer due to permanent elasticity
- Vibration and sound-damping properties
- Excellent resistance to ageing, weathering – suitable for indoor and outdoor use
- Over-paintable with many water/solvent-based paints (preliminary tests recommended)
- High pick resistance
Typical Uses
- Enviro Flex FC is suitable for commercial and residential, internal and external applications.
- Internal & External Wet Areas
- Basements, walls & floors
- Plant rooms
- Planter boxes
- Bathrooms
- Podiums
- Balconies
- Retaining Walls
- Prisons, schools and public amenities
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Enviroseal SB
Enviroseal SB is a clear, modified acrylic sealing compound for use on concrete floors, driveways and stencil concrete to provide a hard wearing and resistant surface. Enviroseal SB dries to leave a clear protective coating providing a “wet look” while increasing serviceability.
- Fast-drying, easy-apply concrete sealer
- Reduces dust + blocks dirt ingress
- UV resistant weather protection
Features
- Fast drying
- Easy to apply
- Reduces dusting
- Excellent UV resistance
- Economical
- Protects against ingress of dirt
- Protects against substrate weathering
Typical Uses
- Enviroseal SB is suitable for commercial and residential, internal and external applications.
- Anti-dust treatment
- Sealing stencil concrete
- Resealing stencil concrete
- Sealing concrete pavers/tilers
- Coating of car park decks
- Sealing of concrete balconies
- Sealing spray on paving
Primers
Enviro Epoxy B-LV
- Exceptional Versatility
- Long-Lasting Protection in Demanding Environments
- Superior Adhesion Across Challenging Surfaces
Enviro Prime P2
- Very low VOC
- Bonds to most metal surfaces
- Excellent bond to a wide variety of substrates
Enviro Shield
- Bonds to damp and green concrete < 25% moisture content (MC)
- Resistant to a wide range of chemicals
- Negative side barrier
Enviro Prime SB
- Simple to use – 1 part
- Suitable for a wide range of products
- Fast drying
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Enviro Masonry Water Repellent
Enviro Masonry Water Repellent is a masonry sealer designed to penetrate surfaces such as concrete, brick, natural stone and other masonry products, providing a water repellent surface. The substrate is not visually changed after treatment. Enviro Masonry Water Repellent is a siloxane composition and penetrates deep into the pores of the masonry and reacts chemically to provide a durable long-lasting barrier against water and salt ingress.
- Penetrates pours for long lasting protection
- Preserves the natural appearance of stone
- Provides a sufficient barrier to moisture and salt ingress
Features
- Penetrates pores for long lasting protection
- Preserves the natural appearances of the stone
- Provides an efficient barrier to water and salt ingress
- Eliminates efflorescence
- Easy to apply
- Invisible
- Prevents moss growth and dirt retention on concrete surfaces
- Allows masonry surfaces to breath while providing high repellent characteristics
Typical Uses
- Enviro Masonry Water Repellent is typically used in showers, on retaining walls and in planter boxes that require waterproofing by absorption into the material.
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Enviro Flex FL
Enviro Flex FL is a fast curing, high performance, neutral cure, elastomeric polyurethane joint sealant that forms part of Envirosystems waterproofing systems. Enviro Flex FL is designed for use under waterproofing membranes as a cove joint for movement junctions such as floor wall junctions.
- Corner & joint sealer (≤50mm) before membranes
- Fast skin/cure + strong adhesion (non-sag)
- UV-stable, flexible + low VOC (paintable)
Features
- Excellent adhesion
- Rapid skinning and fast cure
- UV stable
- Long term durability
- Excellent bi-axial flexibility
- Excellent organic chemical resistance
- Very low VOC content
- Low dirt pick up
- Non-staining
- Paintable after cure
- Permanently flexible
- Stable – No shrinkage
- Bonds and seals at the same time
- Short cut-off string
- Adhesion to a wide range of substrates
- Non-sag consistency – Good thixotropy
- Allows equalised stress transfer due to permanent elasticity vibration and sound dampening properties
- Over-paintable with many water/solvent-based paints (preliminary tests recommended)
- High pick resistance
Uses
Enviro Flex FL can be used for sealing internal corners between building components such as concrete panels, fibre cement sheets, block and brickwork, and around window and door frames prior to membrane application. Enviro Flex FL is suitable for commercial and residential, internal and external applications.
- Internal & External Wet Areas
- Basements, walls & floors
- Plant rooms
- Planter boxes
- Bathrooms
- Podiums
- Balconies
- Retaining walls
- Prisons, schools and public amenities
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Enviro Flex S.A.F.E
Enviro Flex S.A.F.E is a uniquely formulated, high performance, elastomeric polyurethane intumescent fire rated, structural & acoustic joint sealant, which when cured, forms a waterproof, fire and acoustic seal.
- Fire rated up to 4hrs (AS1530.4) + acoustic rated
- UV-stable, permanently flexible (≤50mm joints)
- No-mix, low VOC + paintable (non-sag, high pick resistance)
Features
- Fire tested (rated up to 4hrs) AS1530.4
- Acoustic Rated
- UV stable
- Long term durability
- Australian Made
- Excellent organic chemical resistance
- Very low VOC content
- Low dirt pick up
- Non-staining
- Permanently flexible
- Stable – No shrinkage
- Short cut-off string
- Adhesion to a wide range of substrates
- No Mixing Required
- Non-sag consistency – Good thixotropy
- Allows equalised stress transfer due to permanent elasticity
- Non-sag consistency – Good thixotropy
- Excellent resistance to ageing, weathering – suitable for indoor and outdoor use
- Over-paintable with many water/solvent-based paints (preliminary tests recommended)
- High pick resistance
Typical Uses
- Enviro Flex S.A.F.E is suitable for commercial and residential,
- internal and external applications:
- Precast & Tilt-Up Panels
- Plasterboard (Fire & Acoustic Rated)
- Fibre Cement Board (Fire & Acoustic Rated)
- In-situ Concrete Floors & Walls
- Brick Work
- Block Work
- Renders
- Service Penetration Sealing
- Expansion & Construction Joints
Primers
Enviro Prime 789
- Ensures Strong, Reliable Adhesion Across Multiple
- Surfaces Performs in Varying Site Conditions
- Simplifies Application Without Compromising Quality
Enviro Prime SB
- Simple to use – 1 part
- Suitable for a wide range of products
- Fast drying
Enviro Shield
- Bonds to damp and green concrete < 25% moisture content (MC)
- Resistant to a wide range of chemicals
- Negative side barrier
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us
Enviro Epoxy B-NS
Enviro Epoxy B-NS is 100% solids, solvent free, thixotropic epoxy mortar binder suitable for structural concrete repairs in vertical and overhead applications. Epoxy B-NS has a proven history in concrete repair, bonds to a variety of substrates and performs well in the most demanding environments.
- Non-sag 2-part epoxy adhesive
- Restores strength + waterproof
- Low VOC + chemically resistant
Features
- Very Low VOC
- Restores structural design strength
- Chemically Resistant
- Adheres well to Cured Polyurethane
- Excellent Adhesion
- Waterproof
- Multi-Purpose Use
Typical Uses
- Concrete Crack Repair
- Spalling Repair
- Water Treatment and Supply
- Adhesive for Bonding to Concrete
- Adhesive for Immersed Applications
- Production to Non-Sag Mortars
- Waterproofing of Damaged Concrete
- Waterhouse Floor Repair
- Grouting of Bolts and Anchors
Primers
Enviro Epoxy B-LV
- Exceptional Versatility
- Long-Lasting Protection in Demanding Environments
- Superior Adhesion Across Challenging Surfaces
For applicators
Access the Applicator Portal for Ordering and Project Support
Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.
Contact Us