Remedial

    Enviro Gel 155

    Enviro Gel 155 is a moderate viscosity hydrophobic polyurethane formula with high elongation properties for sealing leaking cracks or joints where movement is possible. The Enviro Gel 155 system is comprised of a base resin (Part A) and an accelerator (Part B). The accelerator can be used be experienced applicators to control the reaction time as warranted by the site conditions. Being a hydrophobic formulation, when reacted with minimal amounts of water, the resulting foam will maintain its physical form and not be subject to shrinkage due to wet/dry cycles. When injected into wet cracks, Enviro Gel 155 produces closed cell foam.

    • Pumpable 1-part gel (≤50mm)
    • 100% solids, no VOCs
    • Expands to 25 times initial volume
    Technical Documents
    Case Studies
    Features & Uses
    Product Data Sheet
    TDS Enviro Gel 155 R01 2024 – Product Data Sheet Download
    Safety Data Sheets
    Enviro Gel 155 Accelerator – SDS Download
    Enviro GEL 155 – SDS -V2 Download

    Features

    • 100% Solids
    • No VOC’s
    • Non-Flammable
    • Excellent Adhesion
    • Expands to 25 times initial volume
    • Pumps as Single Component
    • Controllable Reaction Times
    • Non-Toxic Permanent Seal

    Typical Uses

    Enviro Gel 155 can be used for sealing joints such as construction joints less than 50mm in concrete slabs, concrete panels, fibre cement sheets, block and brickwork, around window and door frames. Enviro Gel 155 can also be used for;

    • Water Related Facilities
    • Waste Treatment Plants
    • Storm Water Systems
    • Parking Garages
    • Manhole Facilities
    For applicators

    Access the Applicator Portal for Ordering and Project Support

    Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.

    Contact Us