Waterproofing

    Enviro 200P Ultra

    Enviro 200P Ultra is an ultra-flexible, class III waterproofing membrane specifically designed for internal use under tiles and for a range of water tank applications. Enviro 200P Ultra is formulated on a water-based crosslinked copolymer system that is urethane modified.

    • Fast-drying waterproofing (under tiles/coatings)
    • Permanent immersion ready (tanks/liners)
    • Low VOC, water-based + crack-bridging (no fabric)
    Technical Documents
    Typical Detail Drawings
    Case Studies
    Features & Uses
    DATA SHEETS
    TDS Enviro 200P ULTRA R022024 – Product Data Sheet Download
    Enviro 200P Ultra – SDS – May 2022 -V3 Download
    CERTIFICATES
    Enviro 200P Ultra – Australian Made Certificate Download
    Enviro 200P Ultra Typical Detail Drawings
    200P-4.21.001_ANGLE WATERSTOP DETAIL Download
    200P-4.11.001_HORIZONTAL WALL PENETRATION DETAIL (PROTECTED) Download
    200P-4.21.006_PUDDLE FLANGE DETAIL Download
    200P-4.21.005_PUDDLE FLANGE DETAIL – WALL JUNCTION Download
    200P-4.21.004_DOUBLE INTERNAL WET AREA MEMBRANE DETAIL Download
    200P-4.21.003_INTERNAL WET AREA MEMBRANE DETAIL Download

    UNSW, Sydney, NSW

    Enviro 200P Ultra was specified as an internal waterproofing membrane across multiple buildings within the UNSW redevelopment in Sydney, including the Science & Engineering Building, the Biological Science Building and the UNSW Round House. Selected for its ultra-flexible Class III performance and water-based, urethane-modified formulation, Enviro 200P Ultra provided reliable waterproofing under tiled finishes and supported water containment applications where required. The result was a durable, compliant internal membrane solution suited to the demands of a high-use campus environment.

    UNSW, Sydney, NSW

    Features

    • Fast drying

    • Water based, easy clean up

    • Very low VOC content

    • Excellent vertical hold-up

    • Excellent crack bridging ability

    • No reinforcing fabric required

    • Modified polyurethane eliminates re-emulsification

    • Outstanding elongation

    Typical Uses

    • Enviro 200P Ultra is used for the waterproofing of walls, floors, decks and roof areas that will be covered with a wearing surface, such as tiles or other appropriate protective coatings. Enviro 200P Ultra can also be used as a tank liner in permanent immersion situations.

    • Internal wet areas

    • Bathrooms, kitchens, laundries

    • Fire sprinkler tanks

    • Greywater tanks

    • Stormwater retention tanks

    Primers and Related Products

    Enviro Shield

    • Bonds to damp and green concrete less than 25% moisture content (MC)
    • Resistant to a wide range of chemicals
    • Negative side barrier
    • Rising damp control
    • High solids content
    • Low VOC
    • Water-based

    View Products

    Enviro Prime WB

    • Fast drying
    • Easy to apply
    • Reduces dusting
    • Excellent UV resistance
    • Economical
    • Protects against ingress of dirt
    • Protects against substrate weathering
    • Solvent free
    • >90% water retention efficiency as a curing compound when tested to AS3799

    View Products
    For applicators

    Access the Applicator Portal for Ordering and Project Support

    Trusted by industry leaders, delivering high-performance construction solutions with sustainability at the core.

    Contact Us